MIG Welder 140Amp Flux Core Welder 110V/220V Dual Voltage MIG/ARC 2 in 1 Welding Machine IGBT Inverter Portable Welder

It doesn't come with spool, so I had to get that separately. I plugged it into a 20A outlet, and no issues. It welds 1/4inch steel plates without any problems. The flux core wire does tend to splatter a bit more than normal stuff, but it cleans up fine with a wire brush. I'm happy with it.

Fairly low duty cycle, but that is fine. Am only going to give it light usage.

Fairly low duty cycle, but that is fine. Am only going to give it light usage.

TPE9xaPXBfetc9Be6bprtxP17nFb75CYqz

TKUmhJPEvxyDX7Nn8xjyVXLXaF63gEqHmE

TGD3vtot2E2Fx7Xu2XQZwKoFrLoVNCFUWz

TULYX9dUdnsKGeQYctZJDXUboew3VfuexW

TF2v9G8X4ELTtDtkz5kZMvKTzTHCd5L2d4

TN6BezesefSkFAWYUN6J2hU9LyXhjXrNWZ

TVicd6pfbVSvJf2F5GKRbsFdULBj6y7zpc

TBDzFZZZtRCb7iDHxM428Pbud1nAGTNwbf

TUbpwFhz92Ecig7CZcoRLry2jtybvqUfFM

TYnhN56UZXD8SJAcqsDhCjgYq8VzuBjdpY

TQcuVhjPsVMxP13aNfnwFTfPEYSc3tCEKS

TXjHmkMrJKiRGo7278zG5FYu3aafKJAtnU

TVJUgVPnWrTKKVPVAXgFo2ys1njU6Z1vrJ

TESTdG2nqTJ4U8FudS1Hfr9fCuPdxdRgLm

TBumN9XTYaR7HeQL4fZJ6kjmUW6QYqpT7r

TMn16STB1FymcgKYo5e6GwC1i4KB4kEUW6

TWQWbwmRMAuStP4ruqoJHUKq3x2poLhuAS

TCyF4Z5AAafto3rYbhxafbhgQWPmYnet9s

TRySHCz17ge4x8usnMq68UdtCkqdx2UQmh

TS2mdTUgmUvehjQSE4bwpNBxSdL2PfPKon

TFYLNY4tbHvj7SPV8q1wirnMCPCsdw6bDx

Works well and love the ability to control heat. It has a lot of different tips that come with the solder iron. When replacing Surface Mount Devices (SMD), it is good to use the hot air gun and use of the air speed so as not to blow the SMD device off the board trying to solder. I added a holder for the solder spools (from a bathroom toilet tissue holder) and used a magnet to hold the base to the top of the station. Well worth the money, especially when working on SMDs.

Works well and love the ability to control heat. It has a lot of different tips that come with the solder iron. When replacing Surface Mount Devices (SMD), it is good to use the hot air gun and use of the air speed so as not to blow the SMD device off the board trying to solder. I added a holder for the solder spools (from a bathroom toilet tissue holder) and used a magnet to hold the base to the top of the station. Well worth the money, especially when working on SMDs.